Product Overview
This oil-immersed transformer is designed for efficient and reliable power supply. It uses high-quality silicon steel sheets and advanced vacuum oil injection technology to significantly reduce no-load and load losses. Compared with S11 products, this transformer can save you considerable electricity bills in the long run.
Type And Meaning
Product Features
Multiple protection devices
This transformer is equipped with a pressure relief valve. When the internal pressure of the transformer reaches 35Kpa, the pressure relief valve will release pressure or alarm.
Good heat dissipation performance
The transformer coil is immersed in insulating oil. The oil is not only an excellent insulating material, but also can effectively take away the heat generated by the coil and the core, and dissipate the heat into the air through the heat sink.
Noise reduction
The transformer core has no joints and the three-phase magnetic circuit is completely symmetrical. The noise is 8-13dB lower than the old model transformer
Executive Standards
|
GB1094.1-2-2013 |
GB1094.5-2008 |
|
GB1094.3-2003 |
GB/T6451-2008 |
|
GB/T1094.4-2005 |
GB/T6451-2015 |
|
GB/T1094.4-2005 |
IEC76 |
|
GB/T25289-2010 |
Hot Tags: 30-2500kva/10kv three-dimensional wound core transformer, China 30-2500kva/10kv three-dimensional wound core transformer manufacturers, suppliers, factory, 25 kva pad mounted transformer, 4000 kva transformer, 500 kva oil filled transformer, distribution transformers, voltage regulating transformer, Wind Power Transformer